よくある質問
クーポンセンター
注文履歴
カート
詳細
商品 | Lens Adapter | Sony E Mount Body |
Manual lens adapter ring III generation EOS-NEX
0
価格なし
数量
Supported Payment Method
この商品について
For product extended warranty services please click HERE
製品仕様
Notices before purchasing:
- Canon STM series lenses don't work with our Canon EOS (EF / EF-S) D/SLR Lens adapters.
- STM lens (such as EF 50mm f/1.8 STM, EF 18-135 IS STM) requires to be powered to drive the motor to focus, so cannot achieve focus with manual adapters.
- Manual adapters have no electronic contacts, which therefore don't support auto-focus or aperture control. K&F Concept lens mount adapters are all manual ones.
- Please figure out the mount of your camera and lens in case of buying the wrong adapter.
Suitable for:
- • Canon EOS (EF / EF-S) D/SLR Lens
- • Sony Alpha E-Mount Camera
Package Includes:
1X Canon EOS (EF / EF-S) - Sony Alpha E Lens Mount adapter
Features:
- This adapter gives you the ability to use your irreplaceable prime lens and saves you the cost of purchasing new lenses
- The adapters are precision made to insure the perfect fit.
- Allows focus infinity.
- Diaphragm control of the lens is set manually.
- High quality and compact.
- NOTE:Not applicable to Canon lenses of the "STM" series such as (EF 50mm f/1.8 STM/EF 18-135 IS STM,EF 40/2.8 STM etc.)
Sony E-Mount Mirrorless Cameras - Popular models include:
- Sony Alpha α7 I / II / III, α7R I / II / III / IV, α7S I / II / III, α9 I / II, α1
- Sony Alpha α3000, α3500, α5000, α5100, α6000, m α6100, α6300, α6400, α6500, α6600
- Sony Alpha NEX-3, NEX-C3, NEX-F3, NEX-3N, NEX-5, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7
- Sony Smartshot QX1, QX10, QX30, QX100
- Sony Security SNC-VB770, UMC-S3C
- Sony Handicam NEX-VG10, NEX-VG20, NEX-VG30, NEX-VG900
- Sony NXCAM NEX-EA50, NEX-FS100, NEX-FS700, NEX-FS700R
- Sony XDCAM FS5, FS5 II, FS7, FS7 II, FX3, FX6, FX9
- Sony CineAlta VENICE
Note:
- If your camera indicated "lens is not properly installed", please modify the camera menu settings.Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.
- Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate while using this adapter.There is no electrical contacts in the adapter ring. Full manual operation,manual focus, manual iris adjustment can be achieved with body manual exposure,aperture priority exposure.In this case "stop-down mode" will need to be used when metering since the lens does not have the ability to have its aperture controlled by the camera body.You can shoot in Manual or Aperture Priority Mode. Before use, set your camera Menu: "Shoot without lens".
ログインするにはアカウントの承認が必要です。
